-
SOLD OUT
Nendoroid Gaara
¥6,200When did you abandon yourself?
From the highly popular anime “NARUTO-Shippuden”, the Kage “Gaara” has appeared in Nendoroid! The gourd’s mouth on the back can be fitted with blowing sand. Furthermore, if you combine the two large sand parts, you can reproduce the appearance of catching the opponent with “sand-bounded samurai” and the “absolute defense” of the pronoun! In addition, it is possible to reproduce the touching scene that Gaara rescued by Naruto shakes hands with Naruto with a gentle expression. As the seat of the tail beast “Motoraku” of Gaara is also included, please decorate and enjoy!Product name : Nendoroid Gaara (Nendoroida)
Title of work : Naruto Shippuden
Manufacturer : good smile Company
Category : Nendoroid
Release time : 2018/12
specification : ABS & PVC painted movable figure-not to scale-pedestal included-approximately 100mm in height
Prototype production : Takuya Ichihashi
Production cooperation : Nendoron -
SOLD OUT
Nendoroid Uzumaki Naruto
¥5,900From the popular anime “NARUTO-Shippuden”, Nendoroid of the main character “Uzumaki Naruto” will be resold! Although it is a Nendoroid deformity that tends to be a child, I made a cute reminiscent of the look of Naruto, who became adolescent, as an adult. The facial expression parts are in addition to the usual Naruto facial expressions, we have prepared a facial expression similar to nine tails and a facial expression in Sennin mode! Also included are Naruto’s representative Ninjutsu, spiral circles and spiral shurikens. Since both are reproduced with clear parts, they are small but worthwhile parts. The spiral shuriken can be floated with a dedicated long column, so you can reproduce the scene you are throwing in addition to the pose you are holding. The hand that connects the marks has a pretty finished finish, and the wrist parts are removable, so if it is attached to the extension arm that is usually included, it is possible to pose posing another mark! Furthermore, because the illustration sheet of the tail beast “Juijing” (Kurama) is attached, the scene where it interacts with nine tails can also be reproduced.
Product name : Nendoroid Uzumaki Naruto (Nendoroid Uzumaki)
Title of work : Naruto Shippuden
Manufacturer : good smile Company
Category : Nendoroid
Release time : 2018/12
specification : ABS & PVC painted movable figure-not to scale-pedestal included-approximately 100mm in height
Prototype production : Takuya Ichihashi
Production cooperation : Nendoron -
SOLD OUT
Nendoroid NARUTO I am Sasuke
¥5,900Product name
Nendoroid I am Sasuke (Nendoroid I will be happy)
Title of work
Naruto Shippuden
Manufacturer
good smile Company
Category
Nendoroid
Release time
2019/06
specification
ABS & PVC painted movable figure-not to scale-pedestal included-approximately 100mm in height
Prototype production
jarepeno
Production cooperation
Nendoron -
SOLD OUT
Nendoroid Kakashi Hatake
¥6,200Product name
Nendoroid Hatake Kakashi (Nendoroid Hatakekashi)
Title of work
Naruto Shippuden
Manufacturer
good smile Company
Category
Nendoroid
Release time
2019/09
specification
ABS & PVC painted movable figure-not to scale-pedestal included-approximately 100mm in height
Prototype production
Seven soldiers
Production cooperation
Nendoron
The product does not stand on its own. Please use the supplied pedestal.
Photos on the actual product may differ slightly.
There are some differences between the individual products, as the painting process is manual. Please note. -
SOLD OUT
BANDAI HGCE 1/144 Strike Freedom Gundam Light Wings DX Edition 【Resale】 【2nd edition: September 2019 Shipping】
¥5,600From “Mobile Suit Gundam SEED DESTINY”, “a wing of light” corresponding to the HGCE kit, A set of effect parts that can reproduce “full burst mode” comes up! The joints and part of the frame of Strike Freedom Gundam use matte gold plating
■ ■ WING OF LIGHT-Wings of Light-
HGCE “Light Wing” corresponding to Strike Freedom Gundam is reproduced by new modeling. The clear blue molded color reproduces the shape and texture of the wing full of volume. Dragoon can be attached to the tip.■ ■ EFFECT PARTS-reproduce full burst mode! Rich effect parts-
A full burst mode can be reproduced by the newly added various effect parts. Display stand is attached, too and can enjoy three-dimensional display.・ Ejection effect parts can be connected to the wing of light and the base of Dragoon to reproduce the time of injection of Dragoon.
-Reproduce the beam of the lumbar rail gun with a clear yellow effect
-Comes with clear green effect parts that are connected to the tip of the dragoon or beam rifle.■ ■ COATING-Use matte gold plating on parts of joints and frames
Gold plating is used for each joint and part of the fuselage exterior. Improve the texture of Strike Freedom Gundam.● Display stand of clear black is attached!
● Dynamic posing is possible by utilizing the wings of light and various armaments!set content:
HGCE Strike Freedom Gundam Body x 1
Light Wing × 4
Various effect parts for full burst mode reproduction
-Dragoon injection effect x 8
・ Dragon beam effect × 8
・ Beam rifle beam effect × 2
・ Lumbar rail gun beam effect × 2
Beam shield x 1
Beam rifle × 2
Beam saber × 2
Display stand x 1
———————————————-
1/144 scale assembly type plastic model
Target age: 8 years old or more
Product material: PS · PE · ABS
・ No glue is used for assembly -
SOLD OUT
BANDAI ROBOT Soul
YMS-09D Dom Tropical Test Type ver. A. N. I. M. E. ¥9,200Appeared work: Mobile Suit Gundam (MSV)
Main product contents
・ Body
・ Replacement wrist left and right four each
・ Giant ・ Buzz
・ Heat · saber grip
・ Heat saber blade (for storage)
・ Heat saber blade (for light emission)
・ Soil smoke effect (Large) × 2
・ Soil smoke effect (small) × 2
-Wrist storage deck
・ One set of various joints
Main commodity material: ABS, PVC
Product size Total height: about 135mm
Target age; 15 years old -
SOLD OUT
BANDAI Mobile Suit Gundam Counterattack Char RG 1/144 Sazabi [Special Coating]
¥12,900-Shin Gon Shini R G SA SABBY-
———————–
From “Mobile Suit Gundam Counterattack Shaa”, Sazabi is a metallic arrangement with matte plating on the entire body armor,
Furthermore, it appears in the special specification real grade which gave metallic molding color to the inner frame.● Metallic arrangement with a sense of luxury
Impressive red armor is reproduced by matte plating of 2 types.
A specification that makes the multiple structure more pronounced by two different color schemes.
In addition, we adopt metallic molding color with solid feeling to internal frame and each armament.● Realistic decals included.
● It is possible to move pose unique to RG specific bold gimmick
Armament: Beam shot rifle / beam tomahawk / beam sabe/ Shield / Funnel / Missile
1/144 scale assembly type plastic model
Target age: 15 years old or more
Product material: PS · ABS · PP
・ No glue is used for assembly
-
SOLD OUT
BANDAI HG 1/144 MS-04 Bougu
¥3,200From “Mobile Suit Gundam THE ORIGIN” Chapter 4: “The Eve of Destiny”,
Commercialized MS-04 BUG, a prototype that made the MSF threat known to the Earth Federation, available with the HG series kit.
Reproduce the distinctive “orange” machine color with molded colors!
● Reproduce the coloring based on “orange” at the time of trial operation with molding color!
Unlike the Lamba-Ral machine (sold separately), the upper arm and leg parts consist of two colors.
● Comes with a special sticker that can reproduce the numbering in the play!
● A variety of armaments are included that will lead to the first MS battle in human history, the Battle of the Smith Sea!
Heat hawk comes in two types: battle form and storage form (for carrying).
The shield can be mounted on the arm.
● Armor parts, such as shoulder armor, are reproduced with precise details!
Supplied Armament: MS Machine Gun / Heat Hawk / Shield
-
SOLD OUT
FIGUARTS ZERO JINBEI OF CHINALRY
¥7,800“ONE PIECE” comic cover as it is three-dimensional! 11 standard figures appeared in Figuarts ZERO! The seventh edition “Zinbei of Nori seaweed” pays attention to the strong posing of the highly popular Jinbei from its shy character! !
■ Product Specifications Height: about 190mm Material: ABS, made of PVC
■ Set contents ・ Body ・ Dedicated pedestal set -
SOLD OUT
FIGUARTS ZERO ONE PIECE Black foot SANJI
¥5,600“ONE PIECE” comic cover as it is three-dimensional! 11 standard figures appeared in Figuarts ZERO! The sixth bullet “Sanji of black feet” points to the wild kick figure of Sanji. The separately sold expression parts for “Blackfoot Sanji” are also included in the separately sold “Figuarts ZERO nose-shaped Brook” (scheduled for release in October 2019).
■ Product Specifications Height: about 130mm Material: ABS, PVC
-
SOLD OUT
FIGUARTS ZERO ONE PIECE Loving Cotton Candy CHOPPER
¥3,500“ONE PIECE” comic cover as it is three-dimensional! 11 standard figures appeared in Figuarts ZERO! The fifth installment “I Love Cotton Candy Chopper” focuses on the posing and expression of the bright and lovely chopper! The separately sold “Figuarts ZERO Watanabe I Love Chopper Horn Point Ver.” (Scheduled to be released in September 2019) also includes replacement expression parts for “Watame I Love Chopper” (this product).
■ Product Specifications Height: about 70mm Material: ABS, PVC -
SOLD OUT
FIGUARTS ZERO King of sniper sogar king USOPP
¥5,900“ONE PIECE” comic cover as it is three-dimensional! 11 standard figures appeared in Figuarts ZERO! The fourth bullet, “The King of Sniper Singing King Ussop,” usually focuses on the cool poses that Usapp’s well-dressed, holding Galactic Pachinko! ! In addition to the replacement goggle parts, replacement expression parts for the separately sold “War Straw Luffy” (scheduled for release in July 2019) and “The Thief Cat Nami” (scheduled for release in August 2019) are also included with this product.
■ Product Specifications Height: about 120mm Material: ABS, PVC
-
SOLD OUT
FIGUARTS ZERO ONE PIECE Thief cat NAMI
¥5,200“ONE PIECE” comic cover as it is three-dimensional! 11 standard figures appeared in Figuarts ZERO! The third bullet “The Thief Cat Nami” has a weather stick, and Nami’s charming posing is full of navigator-like points! The separately sold “Figuarts ZERO Sniper’s King Soge King Usop” (scheduled to be released in August 2019) also comes with replacement look parts for “The Thief Cat Nami”.
■ Product Specifications Height: about 150mm Material: ABS, PVC
-
SOLD OUT
FIGUARTS ZERO ONE PIECE Pirate hunting ZORO
¥5,200“ONE PIECE” comic cover as it is three-dimensional! 11 standard figures appeared in Figuarts ZERO! The second edition “Zoro of pirate hunting” pays attention to the rising muscles and sharp gaze of three swords Zoro! ! The separately sold “Figuarts ZERO nose-shaped Brooke” (scheduled to be released in October 2019) also comes with replacement expression parts for “Pirate Hunt Zoro”.
■ Product Specifications Height: about 110mm Material: ABS, PVC
-
SOLD OUT
FIGUARTS ZERO STRAWED LUFFY
¥3,900“ONE PIECE” comic cover as it is three-dimensional! 11 standard figures appeared in Figuarts ZERO! The first bullet “War Straw Luffy” appears in the long-sleeved red short sleeve, blue shorts, and the captain Luffy, who has yellow yellow waistband, in a costume that can be said as a staple! ! The separately sold “Figuarts ZERO Sniper king Sosoke King Usop” (scheduled for release in August 2019) also comes with replacement facial expression parts for “War Straw Luffy”.
■ Product specification Height: about 140mm Material: ABS, made of PVC
■ Set contents ・ Body ・ Dedicated pedestal set -
SOLD OUT
BANDAI DRAGONBALL ADVERGE MOTION SET
¥4,800With the “Deformation Feeling”, “Forming Density”, and “Color Density” of the ADVAGE series, it is the appearance of a posing figure that reproduces the impressive scene of the work.
In the first installment, from the cell edition of “Z”, the battle scene of “parent-child turtles wave” vs. cell, the future trunks edition of “super”, the battle scene of Goku black and trunks from the battle edition of power, the competition edition of power Included. Contains new and old popular characters.※ It is all non-duplicate set version without duplication of “DRAGONBALL ADVERGE MOTION (with ten pieces)” to be released in June, 2019.
※ The actual product comes with pedestals, posts, auxiliary parts, etc.-Set of 6 colored dolls (all 6 types)
1. Son Gohan (Super Saiyan 2)
2. Son Goku (Super Saiyan)
3. Cell (full body)
Four. Goku Black (Super Saiyan Rose)
Five. Trunks (Super Saiyan)
6. Son Goku (selfish secret)
● Gum (soda taste) 6 pieces[Material]
Dolls, auxiliary parts: PVC【size】
H about 50mm × W about 30mm[Target age]
15 years old or older -
SOLD OUT
BANDAI Dragon Ball Advance 11 (10 pieces)
¥7,200The 11th “Dragon Ball Advage Series” comes up!
In this bullet, “Son Goku” (selfish extreme “Trends”) that appeared in the TV anime “Dragon Ball Super” and gained high popularity finally appeared! We will also record “Vegeta (Super Saiyan Blue Evolution)” which we fought together for the first time. In addition, “Gotenks (super Saiyan 3)” and “Piccolo” are recorded from “Devil Buu Hen” which has been picked up in SP2 and ADVAGE 10!
In addition, Yamcha and Saibaiman will appear for the first time from Dragon Ball Z: Saiyan Attacks.-One set of colored dolls (all six types)
1. Son Goku (The Selfishness “Trends”)
2. Vegeta (Super Saiyan Blue Evolution)
3. Gotenks (Super Saiyan 3)
Four. Piccolo
Five. Yamucha
6. Two bikers
● 1 gum (soda taste)[Material]
Dolls, auxiliary parts: PVC【size】
H about 50mm × W about 30mm[Target age]
15 years old or older※ We accept only set sale.
※ All species are aligned in one set, but some may overlap. -
SOLD OUT
BANDAI HG Movie Dragon Ball Super Goku! Vegeta! Fusion set [ships in August 2019 ]
¥12,800A set that complements the lineup of Goku, Vegeta and Gozita that appeared in the movie Dragon Ball Super Broly will appear in the Premium Bandai! The lineup is not in the general store products, SSG Son Goku and SSGSS Vegeta lineup! In addition, SSGSS Gojita EXRTA FINISH Ver., Which has a special paint on the clear molded body, comes with a large volume of effect parts and a light-up pedestal. The light-up pedestal illuminates the effect parts, making it possible to enjoy a powerful display.
【set content】
8 already painted figures
ABS pedestal 7 pieces
SGSSS GOJITA EXRTA FINISH Ver. Dedicated light up pedestal 1[Product material]
ABS, PVC, MABS[Product size]
Approximately 90mm in height
Effect parts: Height approx 150mm[Target age]
15 years old or older【Country of origin】
China※ For the specifications of the product ※
・ Publication photograph is a trial product. Please note that it may differ from the actual product.
・ This product is not available for sale in Gashapon.※ About order condition ※
-Product specifications and shipping date may change without notice. Please note.
・ We will stop accepting orders as soon as the number of preparations is reached. If you receive a large number of requests, we may adjust the number of preparations and sell again. Please note -
SOLD OUT
BANDAI Figure-rise Standard Cell
¥4,700Figure-rise Standard, a prefabricated action figure that can be easily collected!
High quality cells (complete) are available at this low price!
180 mm in height and the most suitable size for collection and decorating.
Reproduce the natural finish in the assembly in accordance with the parts division and muscle line finely divided to the color in the pupil!
In addition, poses such as Kamehame waves are also free with expression parts and effect parts!
Figure-rise Standard Dragon Ball plans to commercialize various characters in the future!
Collect! Decorate! Play!
Accessories: face (another expression: evil) × 1, wrist (camel wave) (left and right) × 1,
Kamehameha Wave Effect (for) × 1, Kamehameha Wave Effect (released) × 1, Kamehameha Wave Effect pedestal × 1
—
Assembly type plastic model
Target age: 15 years old or more
Product material: PS · ABS
—
※ We do not use adhesive for assembly.
※ This product is not a limited item. (You can purchase at the plastic model handling store shop)
※ The product image is painted.
Also, product photos may differ slightly from the actual product.
-
SOLD OUT
BANDAI DRAGON BALL PC Cushion The Perfect Boss Freeza
¥7,500Collaboration with LINE stamp “Doragon ball Rutetto ideal boss Freeza” designed to commemorate the 30th anniversary of “Dragon Ball” animation!
“PC Cushion Ideal Boss Freezer” with a set of plush toys and armrests with the motif of “the ideal boss Freeza” where Freezer-sama became a business suit appeared!
You can work in a comfortable posture by holding a freezer-like stuffed toy about 45 cm in height with a beautiful business suit figure between the desk and the body.The removable armrest is designed with a lot of Freeza-like members and the members of the Ginyu Special Sentai! The back side is filled with many wonderful words of Mr. Freeza.
Scheduled to ship in August 2019
【set content】
Stuffed cushion … 1 piece
Armrest … 1 piece[Product material]
Stuffed toy: polyester
Button: UP
Rubber: Synthetic rubber
Armrest: polyester[Target age]
15 years old or older【size】
Approximately width 48cm × height 45cm × depth 32cm【Country of origin】
Vietnam※ If you reach the number of preparations, we may end sales.
※ The sale may have ended when you accessed the page.
※ Product specifications may be changed without notice. -
SOLD OUT
[late July 2019] Portrait Of Pirates ONE PIECE “LIMITED EDITION” Black Beard Hina
¥15,000Product introduction
To commemorate the 15th anniversary of the release of the P.O.P One-Piece series, Colonel Naval Headquarters Colonel “Hina of the Black Rose” will appear in the long-awaited high quality figure.Since the first appearance in the Alabasta chapter, the “Oriole Fruit” ability person who stands in front of the Luffies in every scene such as the Marin Ford top war. Because there is not much activity as the main character of the story, we will saturate popular characters that have not been blessed with 3D until now according to the P.O.P Memorial Year!
The figure of a chick with hands on the waist and cigarettes, the body line with a slurry, etc. reproduces the charm of the chick fully. You can also enjoy the look of wearing sunglasses by replacing parts. In addition, the court with the character of justice is also removable. Please enjoy the beauty of cool beauty with excellent style at hand!
Product information
◆ Product Name
Portrait.Of.Pirates ONE PIECE “LIMITED EDITION” Black Beard Hina◆ Product size
Approximately 235mm in height◆ Product specification
・ Painted finished product figure … 1
・ Dedicated pedestal … 1◆ Item shipping date
Scheduled to ship in late July 2019◆ Purchase restrictions
Up to 3 per person at a time * Only 1 can be purchased after 1 procedure.
(In our site for the convenience of packing and shipping, we have refused multiple orders of the same product and simultaneous orders with other products. When ordering more than one, please make multiple procedures.)◆ Order acceptance period
Scheduled for Friday 8 February 2019-early April 2019 -
SOLD OUT
Variable Action Heroes ONE PIECE Portgas D Ace (Resale)
¥10,800■ Item content: Completed painted action figure, optional parts
“Variable Action Heroes” Portgas D Ace will reappear. Reproduce the attraction of the Whitebeard Pirates Unit Second Commander ‘Ace of Fire Fist’ as an action figure of about 18 cm in height. You can enjoy various situations by putting on and taking off the hat and changing the expression, and also comes with various fire fist effects. A bold action pose is also possible using the demon’s real ability. It is a product that can be realistically reproduced and painted, and can be enjoyed either by decorating or touching.RELEASE DATE
2019 June
-
SOLD OUT
Portrait Of Pirates One Piece “SA-MAXIMUM” Monkey D. Luffy “Gear 4” Snake Man
¥23,800Product introduction
The POP One-Piece series has reached its 15th anniversary in 2019. In the “MAXIMUM” brand, which is establishing a solid position as a high-end model and a signboard product, “Sneakman”, the latest form of Luffy “Gear 4”, will make a bold participation in the modeling and coloring of great power.Prototyping of edgy proportions that specializes in more speed-oriented battles while inheriting the buzzing “Bound Man” design, prototyping: MAS (Pinpoint) × Color sample production: As per image by Ando Kenji’s tag 3D reproduction.
The death fight with over 1 billion men and Katakiri will come back to the mind, and it will be just “MAXIMUM” quality, so do not miss the fans!
Product information
◆ Product Name
Portrait.Of.Pirates One Piece “SA-MAXIMUM” Monkey D. Luffy “Gear 4” Snake Man◆ Product size
About 260 mm in height◆ Product specification
・ Painted finished product figure … 1◆ Item shipping date
Scheduled to ship in late August 2019◆ Purchase restrictions
Up to 3 per person at a time * Only 1 can be purchased after 1 procedure.
(In our site for the convenience of packing and shipping, we have refused multiple orders of the same product and simultaneous orders with other products. When ordering more than one, please make multiple procedures.)◆ Order acceptance period
Scheduled for Friday, March 8, 2019-early May 2019 -
SOLD OUT
Variable Action Heroes: ONE PIECE: Monkey D. Luffy (Resale)
¥10,800Due to popular demand, the very first in the Variable Action Heroes series is once again being re-released – the ever popular Monkey D. Luffy!
The action figure strands an impressive 16.5cm in height and has been carefully sculpted and painted with a realistic touch, allowing to to be enjoyed as both a decorative piece as well as an action figure filled with fun!
The figure also includes a selection of interchangeable parts including three different facial expression parts, and three pairs of hands. Luffy’s iconic straw hat is also removable allowing for even more different posing options.
Make sure you don’t miss out on adding this classic action figure to your collection!
ADDITIONAL INFORMATION
- Pre-painted action figure with interchangeable parts
RELEASE DATE
2019 June
-
SOLD OUT
LAPUTA: CASTLE IN THE SKY: Music box sound tray
¥7,500Released July 20, 2018.
When you press the footstep tile of the robot soldier, the heraldic part of the eyes and chest glows with the music box of “with you”.
When the theta sings a secret word learned from her grandmother … The seal of Laputa is unsealed, the robot soldier wakes up, that scene is reproduced.
The tray part in front of the robot soldier is the size that is good for putting “lighting flying stone light Michiki”.
Please place important things such as accessories and keys.
By bringing the “flying light stone Michibiki” in response to the word “Buls” close to the crest on the tray, there is also a link function that delivers a powerful sound when the robot soldier recovers.
It also supports the secret mode of “Lighting flying stone light Michibiki”.
Bringing a flying stone in response to a secret word learned from your grandmother to the crest on the tray … you can hear a different sound than the bals mode!
We use three AAA batteries ×. (Sold separately)
※ It is an image, glowing flight stone is sold separately
* Product size: about 90 × 110 × 155 mm
* Package size: about 150 x 145 x 180 mm
* Product weight: about 195 g
* Package specification: PET blister box
* Material: ABS · PVC (arms and feet)
* Target age: 15 years old
* Country of origin: China
* Manufacturer: Benelic Co., Ltd.
JA JAN code: 4990593279203 -
SOLD OUT
WHEN MARNIE WAS THERE: If you listen to the Baron and Luise music box set
¥15,800Music box set of lovers Baron and Luise.
Two people who could not meet again in the play …
Please decorate by all means together ♪Title: Country Road
● Music box “Baron Doll” 5,800 yen + tax
JAN code: 49905932812821
● Music box “Luise” 5,800 yen + tax
JAN code: 4990593281398* Product size:
Baron / about 85 × 240 × 85 mm
Louise / about 100 × 230 × 90 mm
* Package size:
Baron / about 145 × 290 × 145 mm
Louise / about 140 × 280 × 140 mm
* Commodity weight: Baron / about 358g · Louise / about 614g
* Target age: 15 years old
* Material:
Baron / polyester resin · ABS · brass
Louise / polyester resin · PVC
* Manufacturer: Benelic Co., Ltd. -
SOLD OUT
HOWL’S MOVING CASTLE: Doll Grandma Sophie
¥8,300It is about 28cm and has presence☆
Size: approximately 28 cm
‘Howl’s Moving Castle’
Director Hayao Miyazaki,
It’s an animated feature of Studio Ghibli.
Published in 2004.Original: Diana Wynne Jones
‘Howl the Wizard and the Wicked Fire’
scriptwriter: Hayao Miyazaki
Producer: Toshio Suzuki
Music: Kumeishi -
SOLD OUT
THE PRINCESS MONONOKE: Music box series Sun
¥6,500It seems to pop out
San’s music box.
Well under your face
The face is built in.◆ Title “The Princess Mononoke”
* Product size: about W80 × H130 × D90mm
* Package size: about W120 × H206 × D120
* Product weight: about 340 g
* Material: polyester resin
(Sun part is PVC)
* Manufacturer: Benelic Co., Ltd.
JA JAN code: 4990593174409
